
Inconel 600 pipe Fitting
Material Specification and Dimension Standards:
Product Category | Material Specification as per ASME/ASTM | Dimension Standards |
---|---|---|
Buttweld Pipe Fittings | ASME SB366/366M Inconel 600, ASTM B366/366M Inconel 600 | ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25 |
| Seamless | Welded |
---|---|---|
Elbows | Upto 24" | Upto 42" |
Tees | Upto 24" | Upto 36" |
Reducers | Upto 24" | Upto 48" |
End Caps | Upto 24" |
|
Return Bends | Upto 8" |
|
Cross | Upto 8" | Upto 36" |
Swage Nipple | Upto 4" |
|
Special Fittings: Piggable Bends, 3D, 5D, 10D etc. Customized Bends, Miter Bends | As per customer drawings and datasheets | |
Thickness | Sch 5, Sch 5s, Sch 10, Sch 10s, Sch 20, Sch 30, Sch 40s, Sch 40, Sch STD, Sch 60, Sch 80s, Sch 100, Sch 120, Sch XS, Sch XXS, Sch 160, upto 50mm in case of welded fittings |
Notes : We can meet other dimensions outside the above mentioned range in special cases.
Why choose Us:Other Product Names(Equivalent)
UNS Nos | Other Names |
---|---|
UNS N06600 | alloy 600, W.Nr. 2.4816, INCONEL alloy 600 |
90 Degree Long Radius Elbow | 90 Degree Short Radius Elbow | 45 Degree LR Elbow | Reducing Tee | Concentric Reducer | 180 Degree Long Radius Bend |
180 Degree LR Bend | Buttweld Cross | Swage Nipple | Piiggable Bends | Stub Ends as per MSS-SP 43 | 45 Degree Long Radius Elbow |
45 Degree Short Radius Elbow | 45 Degree SR Elbow | Equal Tee | Eccentric Reducer | 180 Short Radius Bend | 180 SR Bend |
Unequal Cross | Concentric Swage Nipple | 3D Bends | Long Stub Ends | 3D Bends | 5D Bends |
Induction Bends | Miter Bends | U Bends |
Inconel 600 is used to make furnace equipments
Alloy 600 is applied in Chemical Processing and Food Processing Plants.
Inconel 600 is used in Nuclear Power Plants
![]() |
SEAMAC PIPING SOLUTIONS INC.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |